Double Layered Scalloped Soft Cornice
The Double Layered Scalloped Soft Cornice is a board mounted window treatment that utilizes side legs that are attached to the top board so that the fabric can be pulled tight across the front of the treatment to form a flat cornice box like appearance. Comes standard with a 1/4" self covered cording on the bottom of both layers of fabric of the window treatment. The side legs reduce the inside measurement of the window treatment by 1 1/2", so you must add 2" to your width when ordering.
Double Layered Scalloped Soft Cornice
- Available in one inch increments to 92" width.
- Choice of two fabrics.
- Length is 18" at the long point.
- Lined in lining.
- 1/4" self cording on the bottom of both layers of the treatment.
- The number of scallops depends on the width of the treatment.
- Side legs are 1" shorter than the finished length of the treatment .
- Available with a 3 1/2" or 5 1/2" projection - please specify.
- Add 2" to width you need when placing order as the cornice legs will reduce the inside measurement of your treatment by 1 1/2" - please call if you have any questions regarding getting the correct size ordered.
- Due to shipping restrictions, the side legs will not be attached for treatments over 55" wide and will need to be attached once you receive the order (This is a simple procedure that requires a screw driver. The hardware will be provided).
- Available options include: adding a self covered cord or twist cord to the top of the board or you can replace the bottom standard self cording to twist cording upgrade.
